FireKing® Commercial Door Operator
Heavy Duty
The FireKing® operator is engineered specifically for FireKing® rolling fire doors that handle up to 60 cycles per hour and over 100 cycles per day.
Features
| Motor | Continuous-duty AC motor with overload protection |
| Drive | Heavy-duty worm gear running in oil bath. |
| Brake | 24 VDC disc brake standard. |
| Emergency Disconnect | Emergency hoist for manual operation. |
| Warranty | 2-year/20,000-cycle limited warranty. |
| Includes 9-tooth sprocket to attach limit chain to door. | |
| Continuous-duty AC motor with overload protection. | |
| LimitLock® electro-mechanical limits. | |
| Voltamatic® voltage simplification. | |
| Maximum run timer automatically adjusts to up and down run time | |
| Heavy-duty worm gear running in oil bath. | |
| Delay on reverse. | |
| 16-character LCD display. | |
| UL 325 Listed. | |
| Advanced radio receiver displays and stores activation by transmitter ID number on the LCD screen. | |
| 3-button control station. | |
| Programmable mid-stop. | |
| Emergency hoist for manual operation. Ships right hand from factory and is easily changed in the field. | |
| 24 VDC disc brake with progressive braking. | |
| Cycle count available via LCD screen. | |
Accessories & Options
| Timer Close Module | Timed close set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input. |
Auxiliary Output Module | Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both. |
UL325 Listed Reversing Devices | The installation of a monitored external entrapment device is required for momentary contact close operation on all commercial door operators. The following devices, when purchased through Overhead Door™, are UL Approved for use to meet this requirement:
|
